FYI ... the pictures are not being displayed in the BOSL2 Tutorials <https://github.com/revarbat/BOSL2/wiki/Tutorials> My Chrome is ver 98.0.4758.102

Problems with BOSL2 should be reported on the BOSL2 github, not by email to this list. I have filed an issue about this problem. On Mon, May 2, 2022 at 10:49 AM Joe Weinpert <joe.weinpert@gmail.com> wrote: > > FYI ... the pictures are not being displayed in the BOSL2 Tutorials > > My Chrome is ver 98.0.4758.102 > > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org

Need to be a github member, correct? On Mon, May 2, 2022 at 4:16 PM Adrian Mariano <avm4@cornell.edu> wrote: > Problems with BOSL2 should be reported on the BOSL2 github, not by > email to this list. I have filed an issue about this problem. > > On Mon, May 2, 2022 at 10:49 AM Joe Weinpert <joe.weinpert@gmail.com> > wrote: > > > > FYI ... the pictures are not being displayed in the BOSL2 Tutorials > > > > My Chrome is ver 98.0.4758.102 > > > > _______________________________________________ > > OpenSCAD mailing list > > To unsubscribe send an email to discuss-leave@lists.openscad.org > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org >

You probably have to create a github account, yeah. But if you post here you're sending the message to 2000 people who don't care and the one person who can fix it (Revar) doesn't follow this list very closely. On Mon, May 2, 2022 at 5:44 PM Joe Weinpert <joe.weinpert@gmail.com> wrote: > > Need to be a github member, correct? > > > On Mon, May 2, 2022 at 4:16 PM Adrian Mariano <avm4@cornell.edu> wrote: >> >> Problems with BOSL2 should be reported on the BOSL2 github, not by >> email to this list. I have filed an issue about this problem. >> >> On Mon, May 2, 2022 at 10:49 AM Joe Weinpert <joe.weinpert@gmail.com> wrote: >> > >> > FYI ... the pictures are not being displayed in the BOSL2 Tutorials >> > >> > My Chrome is ver 98.0.4758.102 >> > >> > _______________________________________________ >> > OpenSCAD mailing list >> > To unsubscribe send an email to discuss-leave@lists.openscad.org >> _______________________________________________ >> OpenSCAD mailing list >> To unsubscribe send an email to discuss-leave@lists.openscad.org > > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org

Will do. Thanks for the info! On Mon, May 2, 2022 at 6:14 PM Adrian Mariano <avm4@cornell.edu> wrote: > You probably have to create a github account, yeah. But if you post > here you're sending the message to 2000 people who don't care and the > one person who can fix it (Revar) doesn't follow this list very > closely. > > On Mon, May 2, 2022 at 5:44 PM Joe Weinpert <joe.weinpert@gmail.com> > wrote: > > > > Need to be a github member, correct? > > > > > > On Mon, May 2, 2022 at 4:16 PM Adrian Mariano <avm4@cornell.edu> wrote: > >> > >> Problems with BOSL2 should be reported on the BOSL2 github, not by > >> email to this list. I have filed an issue about this problem. > >> > >> On Mon, May 2, 2022 at 10:49 AM Joe Weinpert <joe.weinpert@gmail.com> > wrote: > >> > > >> > FYI ... the pictures are not being displayed in the BOSL2 Tutorials > >> > > >> > My Chrome is ver 98.0.4758.102 > >> > > >> > _______________________________________________ > >> > OpenSCAD mailing list > >> > To unsubscribe send an email to discuss-leave@lists.openscad.org > >> _______________________________________________ > >> OpenSCAD mailing list > >> To unsubscribe send an email to discuss-leave@lists.openscad.org > > > > _______________________________________________ > > OpenSCAD mailing list > > To unsubscribe send an email to discuss-leave@lists.openscad.org > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org >

Tutorials fixed. This one was my fault, as I failed to regen the tutorial images when I was regenerating all docs to clean up the wiki. - Revar > On May 2, 2022, at 3:25 PM, Joe Weinpert <joe.weinpert@gmail.com> wrote: > > Will do. Thanks for the info! > > On Mon, May 2, 2022 at 6:14 PM Adrian Mariano <avm4@cornell.edu <mailto:avm4@cornell.edu>> wrote: > You probably have to create a github account, yeah. But if you post > here you're sending the message to 2000 people who don't care and the > one person who can fix it (Revar) doesn't follow this list very > closely. > > On Mon, May 2, 2022 at 5:44 PM Joe Weinpert <joe.weinpert@gmail.com <mailto:joe.weinpert@gmail.com>> wrote: > > > > Need to be a github member, correct? > > > > > > On Mon, May 2, 2022 at 4:16 PM Adrian Mariano <avm4@cornell.edu <mailto:avm4@cornell.edu>> wrote: > >> > >> Problems with BOSL2 should be reported on the BOSL2 github, not by > >> email to this list. I have filed an issue about this problem. > >> > >> On Mon, May 2, 2022 at 10:49 AM Joe Weinpert <joe.weinpert@gmail.com <mailto:joe.weinpert@gmail.com>> wrote: > >> > > >> > FYI ... the pictures are not being displayed in the BOSL2 Tutorials > >> > > >> > My Chrome is ver 98.0.4758.102 > >> > > >> > _______________________________________________ > >> > OpenSCAD mailing list > >> > To unsubscribe send an email to discuss-leave@lists.openscad.org <mailto:discuss-leave@lists.openscad.org> > >> _______________________________________________ > >> OpenSCAD mailing list > >> To unsubscribe send an email to discuss-leave@lists.openscad.org <mailto:discuss-leave@lists.openscad.org> > > > > _______________________________________________ > > OpenSCAD mailing list > > To unsubscribe send an email to discuss-leave@lists.openscad.org <mailto:discuss-leave@lists.openscad.org> > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org <mailto:discuss-leave@lists.openscad.org> > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org