Empathy List Archives

RT

r.d. terramir

Tue, Oct 11, 2016 9:53 PM

I got this coffee machine that is missing the insert the cup stands on,
just curious if I get a few measurements and a photo any peeps here willing
to help design this? I am half way across the USA right now but taking some
down time b4 driving back, figure I feel out the interest. Probably be back
home Sunday.
terramir

I got this coffee machine that is missing the insert the cup stands on, just curious if I get a few measurements and a photo any peeps here willing to help design this? I am half way across the USA right now but taking some down time b4 driving back, figure I feel out the interest. Probably be back home Sunday. terramir

RP

Ronaldo Persiano

Wed, Oct 12, 2016 12:42 AM

May be a good test of my modeling skills and Bezier library. I am in.

2016-10-11 18:53 GMT-03:00 r.d. terramir terramircomputers@gmail.com:

I got this coffee machine that is missing the insert the cup stands on,
just curious if I get a few measurements and a photo any peeps here willing
to help design this? I am half way across the USA right now but taking some
down time b4 driving back, figure I feel out the interest. Probably be back
home Sunday.
terramir

OpenSCAD mailing list
Discuss@lists.openscad.org
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org

May be a good test of my modeling skills and Bezier library. I am in. 2016-10-11 18:53 GMT-03:00 r.d. terramir <terramircomputers@gmail.com>: > I got this coffee machine that is missing the insert the cup stands on, > just curious if I get a few measurements and a photo any peeps here willing > to help design this? I am half way across the USA right now but taking some > down time b4 driving back, figure I feel out the interest. Probably be back > home Sunday. > terramir > > _______________________________________________ > OpenSCAD mailing list > Discuss@lists.openscad.org > http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org > >

JD

Jerry Davis

Wed, Oct 12, 2016 6:50 PM

only if we can have a lesson is bezier curves library as well. thanks.

--
Extra Ham Operator: K7AZJ
Registered Linux User: 275424
Raspberry Pi and Openscad developer

The most exciting phrase to hear in science - the one that heralds new
discoveries - is not "Eureka!" but "That's funny...".- Isaac. Asimov

On Tue, Oct 11, 2016 at 5:42 PM, Ronaldo Persiano rcmpersiano@gmail.com
wrote:

May be a good test of my modeling skills and Bezier library. I am in.

2016-10-11 18:53 GMT-03:00 r.d. terramir terramircomputers@gmail.com:

I got this coffee machine that is missing the insert the cup stands on,
just curious if I get a few measurements and a photo any peeps here willing
to help design this? I am half way across the USA right now but taking some
down time b4 driving back, figure I feel out the interest. Probably be back
home Sunday.
terramir

OpenSCAD mailing list
Discuss@lists.openscad.org
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org

only if we can have a lesson is bezier curves library as well. thanks. -- Extra Ham Operator: K7AZJ Registered Linux User: 275424 Raspberry Pi and Openscad developer *The most exciting phrase to hear in science - the one that heralds new discoveries - is not "Eureka!" but "That's funny...".*- Isaac. Asimov On Tue, Oct 11, 2016 at 5:42 PM, Ronaldo Persiano <rcmpersiano@gmail.com> wrote: > May be a good test of my modeling skills and Bezier library. I am in. > > 2016-10-11 18:53 GMT-03:00 r.d. terramir <terramircomputers@gmail.com>: > >> I got this coffee machine that is missing the insert the cup stands on, >> just curious if I get a few measurements and a photo any peeps here willing >> to help design this? I am half way across the USA right now but taking some >> down time b4 driving back, figure I feel out the interest. Probably be back >> home Sunday. >> terramir >> >> _______________________________________________ >> OpenSCAD mailing list >> Discuss@lists.openscad.org >> http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org >> >> > > _______________________________________________ > OpenSCAD mailing list > Discuss@lists.openscad.org > http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org > >

CA

Carsten Arnholm

Wed, Oct 12, 2016 7:10 PM

On 11. okt. 2016 23:53, r.d. terramir wrote:

I got this coffee machine that is missing the insert the cup stands on,
just curious if I get a few measurements and a photo any peeps here
willing to help design this? I am half way across the USA right now but
taking some down time b4 driving back, figure I feel out the interest.
Probably be back home Sunday.
terramir

If you provide measurements + some decent photos you may perhaps see
several design suggestions from various people. Such projects are nice
exercises.

Carsten Arnholm

On 11. okt. 2016 23:53, r.d. terramir wrote: > I got this coffee machine that is missing the insert the cup stands on, > just curious if I get a few measurements and a photo any peeps here > willing to help design this? I am half way across the USA right now but > taking some down time b4 driving back, figure I feel out the interest. > Probably be back home Sunday. > terramir If you provide measurements + some decent photos you may perhaps see several design suggestions from various people. Such projects are nice exercises. Carsten Arnholm

R

Ronaldo

Wed, Oct 12, 2016 8:00 PM

jdawgaz wrote

only if we can have a lesson is bezier curves library as well. thanks.

My Bezier library is under construction. As soon as I stop to include more
and more functions and conclude the tests I will publish it. And I will be
pleased to give instructions and make demos on its use. For the application
of this thread, I would provided the code of the necessary library
functions.

--
View this message in context: http://forum.openscad.org/Creating-bell-like-curve-to-print-tp18673p18677.html
Sent from the OpenSCAD mailing list archive at Nabble.com.

jdawgaz wrote > only if we can have a lesson is bezier curves library as well. thanks. My Bezier library is under construction. As soon as I stop to include more and more functions and conclude the tests I will publish it. And I will be pleased to give instructions and make demos on its use. For the application of this thread, I would provided the code of the necessary library functions. -- View this message in context: http://forum.openscad.org/Creating-bell-like-curve-to-print-tp18673p18677.html Sent from the OpenSCAD mailing list archive at Nabble.com.

JD

Jerry Davis

Wed, Oct 12, 2016 9:11 PM

ok. great. I am looking forward to it.
So many libraries out there that don't have any instructions, it is hard to
figure out how to use.

--
Extra Ham Operator: K7AZJ
Registered Linux User: 275424
Raspberry Pi and Openscad developer

The most exciting phrase to hear in science - the one that heralds new
discoveries - is not "Eureka!" but "That's funny...".- Isaac. Asimov

On Wed, Oct 12, 2016 at 1:00 PM, Ronaldo rcmpersiano@gmail.com wrote:

jdawgaz wrote

only if we can have a lesson is bezier curves library as well. thanks.

My Bezier library is under construction. As soon as I stop to include more
and more functions and conclude the tests I will publish it. And I will be
pleased to give instructions and make demos on its use. For the application
of this thread, I would provided the code of the necessary library
functions.

--
View this message in context: http://forum.openscad.org/
Creating-bell-like-curve-to-print-tp18673p18677.html
Sent from the OpenSCAD mailing list archive at Nabble.com.

OpenSCAD mailing list
Discuss@lists.openscad.org
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org

ok. great. I am looking forward to it. So many libraries out there that don't have any instructions, it is hard to figure out how to use. -- Extra Ham Operator: K7AZJ Registered Linux User: 275424 Raspberry Pi and Openscad developer *The most exciting phrase to hear in science - the one that heralds new discoveries - is not "Eureka!" but "That's funny...".*- Isaac. Asimov On Wed, Oct 12, 2016 at 1:00 PM, Ronaldo <rcmpersiano@gmail.com> wrote: > jdawgaz wrote > > only if we can have a lesson is bezier curves library as well. thanks. > > My Bezier library is under construction. As soon as I stop to include more > and more functions and conclude the tests I will publish it. And I will be > pleased to give instructions and make demos on its use. For the application > of this thread, I would provided the code of the necessary library > functions. > > > > -- > View this message in context: http://forum.openscad.org/ > Creating-bell-like-curve-to-print-tp18673p18677.html > Sent from the OpenSCAD mailing list archive at Nabble.com. > > _______________________________________________ > OpenSCAD mailing list > Discuss@lists.openscad.org > http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org >

M

MichaelAtOz

Wed, Oct 12, 2016 10:55 PM

r.d. terramir wrote

if I get a few measurements and a photo

If you can find some, I find it helps a lot to have the part on graph paper
for photos from above.

Admin - PM me if you need anything, or if I've done something stupid...

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!

View this message in context: http://forum.openscad.org/Creating-bell-like-curve-to-print-tp18673p18680.html
Sent from the OpenSCAD mailing list archive at Nabble.com.

r.d. terramir wrote > if I get a few measurements and a photo If you can find some, I find it helps a lot to have the part on graph paper for photos from above. ----- Admin - PM me if you need anything, or if I've done something stupid... Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above. The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out! -- View this message in context: http://forum.openscad.org/Creating-bell-like-curve-to-print-tp18673p18680.html Sent from the OpenSCAD mailing list archive at Nabble.com.

discuss@lists.openscad.org

Creating bell like curve to print

The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!