Does anybody know where I can find STL's (or scad files) of the
different Raspberry Pi boards? They just need to be detailed enough for
mounting holes and connector positions.
Best regards,
Mike
Take a look at the Rasperry Pi Documentation
https://www.raspberrypi.com/documentation/computers/raspberry-pi.html
The mechanical drawings should give you what you need
--
Jinnicky
On 5/7/22 21:29, Michael Bronnenberg wrote:
Does anybody know where I can find STL's (or scad files) of the
different Raspberry Pi boards? They just need to be detailed enough
for mounting holes and connector positions.
Best regards,
Mike
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
https://m.all3dp.com/1/best-3d-printed-raspberry-pi-case-3d-print-3d-model/
On Sat, May 7, 2022 at 9:47 PM Bob Ewart jinnicky@bobsown.net wrote:
Take a look at the Rasperry Pi Documentation
https://www.raspberrypi.com/documentation/computers/raspberry-pi.html
The mechanical drawings should give you what you need
--
Jinnicky
On 5/7/22 21:29, Michael Bronnenberg wrote:
Does anybody know where I can find STL's (or scad files) of the different
Raspberry Pi boards? They just need to be detailed enough for mounting
holes and connector positions.
Best regards,
Mike
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
https://github.com/RigacciOrg/openscad-rpi-library
Note that the readme is out of date, the library actually seems
to go up to Raspberry Pi 4.
ciao,
Torsten.
I have OpenSCAD models of the RPI4, RPI3, RPI0 and RPI_Pico here:
https://github.com/nophead/NopSCADlib#pcbs
On Sun, 8 May 2022 at 03:52, Torsten Paul Torsten.Paul@gmx.de wrote:
https://github.com/RigacciOrg/openscad-rpi-library
Note that the readme is out of date, the library actually seems
to go up to Raspberry Pi 4.
ciao,
Torsten.
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
Wow
On Sun, 8 May 2022, 13:27 nop head, nop.head@gmail.com wrote:
I have OpenSCAD models of the RPI4, RPI3, RPI0 and RPI_Pico here:
https://github.com/nophead/NopSCADlib#pcbs
On Sun, 8 May 2022 at 03:52, Torsten Paul Torsten.Paul@gmx.de wrote:
https://github.com/RigacciOrg/openscad-rpi-library
Note that the readme is out of date, the library actually seems
to go up to Raspberry Pi 4.
ciao,
Torsten.
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
I was a fan of the "shimonbox" project, though unfortunately it hasn't
been updated in years.
The main repo doesn't support RPi 4, but I submitted a Pull Request a
while back to add support for it:
https://github.com/ubitux/shimonbox/pull/7
It didn't end up getting merged... mainly because I dropped the ball
and lost interest on addressing the various requested changes.
Alternatively, here is the direct link to my fork with RPi 4 board and
case models:
https://github.com/thehans/shimonbox
On Sat, May 7, 2022 at 9:52 PM Torsten Paul Torsten.Paul@gmx.de wrote:
https://github.com/RigacciOrg/openscad-rpi-library
Note that the readme is out of date, the library actually seems
to go up to Raspberry Pi 4.
ciao,
Torsten.
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org