WL
William Lugg
Fri, May 20, 2022 2:58 AM
I've been using OpenSCAD for a while on my Linux Mint 20.3 box but
tonight when I tried to open it, it didn't. When I entered the command
from the start menu oin the terminal I get the following:
luggw1@tahoe:~$ /usr/bin/flatpak run --branch=stable --arch=x86_64
--command=openscad --file-forwarding org.openscad.OpenSCAD @@ %f @@
Gtk-Message: 21:21:18.250: Failed to load module "xapp-gtk3-module"
Qt: Session management error: Could not open network socket
QString::arg: Argument missing: , /home/luggw1/%f
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
No XVisualInfo for format QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
Falling back to using screens root_visual.
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
No XVisualInfo for format QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
Falling back to using screens root_visual.
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
Could not initialize GLX
FWIW, I just did an update to my NVidia 510 drivers that came via Mint's
update service. My other CAD S/W is working though (FreeCAD and QCAD).
Any thoughts as to how I can fix this?
Thanks
Bill Lugg
I've been using OpenSCAD for a while on my Linux Mint 20.3 box but
tonight when I tried to open it, it didn't. When I entered the command
from the start menu oin the terminal I get the following:
luggw1@tahoe:~$ /usr/bin/flatpak run --branch=stable --arch=x86_64
--command=openscad --file-forwarding org.openscad.OpenSCAD @@ %f @@
Gtk-Message: 21:21:18.250: Failed to load module "xapp-gtk3-module"
Qt: Session management error: Could not open network socket
QString::arg: Argument missing: , /home/luggw1/%f
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
No XVisualInfo for format QSurfaceFormat(version 2.0, options
QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
Falling back to using screens root_visual.
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
No XVisualInfo for format QSurfaceFormat(version 2.0, options
QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
Falling back to using screens root_visual.
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
Could not initialize GLX
FWIW, I just did an update to my NVidia 510 drivers that came via Mint's
update service. My other CAD S/W is working though (FreeCAD and QCAD).
Any thoughts as to how I can fix this?
Thanks
Bill Lugg
M
MichaelAtOz
Mon, May 30, 2022 1:33 AM
Hi Bill,
I'm not a Linux guy, but it does look graphic related, did you try reverting the graphics driver?
-----Original Message-----
From: William Lugg [mailto:luggw1@protonmail.com]
Sent: Fri, 20 May 2022 12:58
To: discuss@lists.openscad.org
Subject: [OpenSCAD] OpenSCAD seems to have stopped working for me
I've been using OpenSCAD for a while on my Linux Mint 20.3 box but
tonight when I tried to open it, it didn't. When I entered the command
from the start menu oin the terminal I get the following:
luggw1@tahoe:~$ /usr/bin/flatpak run --branch=stable --arch=x86_64
--command=openscad --file-forwarding org.openscad.OpenSCAD @@ %f @@
Gtk-Message: 21:21:18.250: Failed to load module "xapp-gtk3-module"
Qt: Session management error: Could not open network socket
QString::arg: Argument missing: , /home/luggw1/%f
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
No XVisualInfo for format QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
Falling back to using screens root_visual.
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
No XVisualInfo for format QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
Falling back to using screens root_visual.
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
Could not initialize GLX
FWIW, I just did an update to my NVidia 510 drivers that came via Mint's
update service. My other CAD S/W is working though (FreeCAD and QCAD).
Any thoughts as to how I can fix this?
Thanks
Bill Lugg
Hi Bill,
I'm not a Linux guy, but it does look graphic related, did you try reverting the graphics driver?
> -----Original Message-----
> From: William Lugg [mailto:luggw1@protonmail.com]
> Sent: Fri, 20 May 2022 12:58
> To: discuss@lists.openscad.org
> Subject: [OpenSCAD] OpenSCAD seems to have stopped working for me
>
> I've been using OpenSCAD for a while on my Linux Mint 20.3 box but
> tonight when I tried to open it, it didn't. When I entered the command
> from the start menu oin the terminal I get the following:
>
> luggw1@tahoe:~$ /usr/bin/flatpak run --branch=stable --arch=x86_64
> --command=openscad --file-forwarding org.openscad.OpenSCAD @@ %f @@
>
> Gtk-Message: 21:21:18.250: Failed to load module "xapp-gtk3-module"
> Qt: Session management error: Could not open network socket
> QString::arg: Argument missing: , /home/luggw1/%f
> qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
> QSurfaceFormat(version 2.0, options
> QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
> redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
> -1, stencilBufferSize -1, samples -1, swapBehavior
> QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
> QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
> No XVisualInfo for format QSurfaceFormat(version 2.0, options
> QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
> redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
> -1, stencilBufferSize -1, samples -1, swapBehavior
> QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
> QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
> Falling back to using screens root_visual.
> qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
> QSurfaceFormat(version 2.0, options
> QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
> redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
> -1, stencilBufferSize -1, samples -1, swapBehavior
> QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
> QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
> No XVisualInfo for format QSurfaceFormat(version 2.0, options
> QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
> redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
> -1, stencilBufferSize -1, samples -1, swapBehavior
> QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
> QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
> Falling back to using screens root_visual.
> qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
> QSurfaceFormat(version 2.0, options
> QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
> redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
> -1, stencilBufferSize -1, samples -1, swapBehavior
> QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
> QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
> qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
> QSurfaceFormat(version 2.0, options
> QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
> redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
> -1, stencilBufferSize -1, samples -1, swapBehavior
> QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
> QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
> Could not initialize GLX
>
> FWIW, I just did an update to my NVidia 510 drivers that came via Mint's
> update service. My other CAD S/W is working though (FreeCAD and QCAD).
>
> Any thoughts as to how I can fix this?
>
> Thanks
> Bill Lugg
--
This email has been checked for viruses by AVG.
https://www.avg.com
WL
William Lugg
Mon, May 30, 2022 2:28 AM
Well, that's the curious thing. This was just an update to the already
installed graphics driver, not a new NVidia version, so there's nothing
to revert to. What's even more puzzling is that I downloaded the
AppImage of the same version and it works fine. Only the one running
through FlatPak seems not to work now.
Bill Lugg
On 5/29/22 19:33, MichaelAtOz wrote:
Hi Bill,
I'm not a Linux guy, but it does look graphic related, did you try reverting the graphics driver?
-----Original Message-----
From: William Lugg [mailto:luggw1@protonmail.com]
Sent: Fri, 20 May 2022 12:58
To: discuss@lists.openscad.org
Subject: [OpenSCAD] OpenSCAD seems to have stopped working for me
I've been using OpenSCAD for a while on my Linux Mint 20.3 box but
tonight when I tried to open it, it didn't. When I entered the command
from the start menu oin the terminal I get the following:
luggw1@tahoe:~$ /usr/bin/flatpak run --branch=stable --arch=x86_64
--command=openscad --file-forwarding org.openscad.OpenSCAD @@ %f @@
Gtk-Message: 21:21:18.250: Failed to load module "xapp-gtk3-module"
Qt: Session management error: Could not open network socket
QString::arg: Argument missing: , /home/luggw1/%f
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
No XVisualInfo for format QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
Falling back to using screens root_visual.
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
No XVisualInfo for format QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
Falling back to using screens root_visual.
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
QSurfaceFormat(version 2.0, options
QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1,
redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
-1, stencilBufferSize -1, samples -1, swapBehavior
QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
Could not initialize GLX
FWIW, I just did an update to my NVidia 510 drivers that came via Mint's
update service. My other CAD S/W is working though (FreeCAD and QCAD).
Any thoughts as to how I can fix this?
Thanks
Bill Lugg
Well, that's the curious thing. This was just an update to the already
installed graphics driver, not a new NVidia version, so there's nothing
to revert to. What's even more puzzling is that I downloaded the
AppImage of the same version and it works fine. Only the one running
through FlatPak seems not to work now.
Bill Lugg
On 5/29/22 19:33, MichaelAtOz wrote:
> Hi Bill,
>
> I'm not a Linux guy, but it does look graphic related, did you try reverting the graphics driver?
>
>
>> -----Original Message-----
>> From: William Lugg [mailto:luggw1@protonmail.com]
>> Sent: Fri, 20 May 2022 12:58
>> To: discuss@lists.openscad.org
>> Subject: [OpenSCAD] OpenSCAD seems to have stopped working for me
>>
>> I've been using OpenSCAD for a while on my Linux Mint 20.3 box but
>> tonight when I tried to open it, it didn't. When I entered the command
>> from the start menu oin the terminal I get the following:
>>
>> luggw1@tahoe:~$ /usr/bin/flatpak run --branch=stable --arch=x86_64
>> --command=openscad --file-forwarding org.openscad.OpenSCAD @@ %f @@
>>
>> Gtk-Message: 21:21:18.250: Failed to load module "xapp-gtk3-module"
>> Qt: Session management error: Could not open network socket
>> QString::arg: Argument missing: , /home/luggw1/%f
>> qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
>> QSurfaceFormat(version 2.0, options
>> QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
>> redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
>> -1, stencilBufferSize -1, samples -1, swapBehavior
>> QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
>> QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
>> No XVisualInfo for format QSurfaceFormat(version 2.0, options
>> QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
>> redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
>> -1, stencilBufferSize -1, samples -1, swapBehavior
>> QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
>> QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
>> Falling back to using screens root_visual.
>> qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
>> QSurfaceFormat(version 2.0, options
>> QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
>> redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
>> -1, stencilBufferSize -1, samples -1, swapBehavior
>> QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
>> QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
>> No XVisualInfo for format QSurfaceFormat(version 2.0, options
>> QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
>> redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
>> -1, stencilBufferSize -1, samples -1, swapBehavior
>> QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
>> QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
>> Falling back to using screens root_visual.
>> qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
>> QSurfaceFormat(version 2.0, options
>> QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
>> redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
>> -1, stencilBufferSize -1, samples -1, swapBehavior
>> QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
>> QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
>> qt.glx: qglx_findConfig: Failed to finding matching FBConfig for
>> QSurfaceFormat(version 2.0, options
>> QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1,
>> redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize
>> -1, stencilBufferSize -1, samples -1, swapBehavior
>> QSurfaceFormat::SingleBuffer, swapInterval 1, colorSpace
>> QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
>> Could not initialize GLX
>>
>> FWIW, I just did an update to my NVidia 510 drivers that came via Mint's
>> update service. My other CAD S/W is working though (FreeCAD and QCAD).
>>
>> Any thoughts as to how I can fix this?
>>
>> Thanks
>> Bill Lugg
>
> --
> This email has been checked for viruses by AVG.
> https://www.avg.com
>