Empathy List Archives

M

MichaelAtOz

Thu, Sep 8, 2016 11:21 PM

Welcome to the forum. Your post is still flagged as "This post has NOT been
accepted by the mailing list yet", so nobody gets it unless they look.
You need to subscribe to the mailing list
http://forum.openscad.org/mailing_list/MailingListOptions.jtp?forum=1 ,
and respond to the registration email.

Quoted below for the mailing-list

ceri wrote

Hi all,
I have just published a reasonably crude, but working OpenSCAD driver for
the space mouse.

check out:
http://www.thingiverse.com/thing:1759635

Hope you enjoy

Ceri

tp3 - update on your work?

Admin - PM me if you need anything, or if I've done something stupid...

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!

View this message in context: http://forum.openscad.org/3D-mouse-support-for-openscad-tp3998p18350.html
Sent from the OpenSCAD mailing list archive at Nabble.com.

Welcome to the forum. Your post is still flagged as "This post has NOT been accepted by the mailing list yet", so nobody gets it unless they look. You need to subscribe to the mailing list <http://forum.openscad.org/mailing_list/MailingListOptions.jtp?forum=1> , and respond to the registration email. Quoted below for the mailing-list ceri wrote > Hi all, > I have just published a reasonably crude, but working OpenSCAD driver for > the space mouse. > > check out: > http://www.thingiverse.com/thing:1759635 > > Hope you enjoy > > Ceri tp3 - update on your work? ----- Admin - PM me if you need anything, or if I've done something stupid... Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above. The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out! -- View this message in context: http://forum.openscad.org/3D-mouse-support-for-openscad-tp3998p18350.html Sent from the OpenSCAD mailing list archive at Nabble.com.

TP

Torsten Paul

Fri, Sep 9, 2016 8:34 AM

Von: MichaelAtOz oz.at.michael@gmail.com

ceri wrote

Hi all,
I have just published a reasonably crude, but working OpenSCAD driver for
the space mouse.

tp3 - update on your work?

Hmm, not much progress with that lately, but maybe we can
think about including it to get feedback. I guess it needs
quite some real-life testing on various machines/platforms.

ciao,
Torsten.

Von: MichaelAtOz <oz.at.michael@gmail.com> > ceri wrote > > Hi all, > > I have just published a reasonably crude, but working OpenSCAD driver for > > the space mouse. > > > > tp3 - update on your work? > Hmm, not much progress with that lately, but maybe we can think about including it to get feedback. I guess it needs quite some real-life testing on various machines/platforms. ciao, Torsten.

M

MichaelAtOz

Sun, Sep 11, 2016 10:19 PM

tp3 wrote

I guess it needs quite some real-life testing on various
machines/platforms.

As a preference/feature, yes please.

The only issue I had was sometimes a slight 'drift' when in neutral
position, it just needs a sensitivity setting, so it can be set to ignore
tiny axis readings, or ignore values smaller than X.

Admin - PM me if you need anything, or if I've done something stupid...

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!

View this message in context: http://forum.openscad.org/3D-mouse-support-for-openscad-tp3998p18368.html
Sent from the OpenSCAD mailing list archive at Nabble.com.

tp3 wrote > I guess it needs quite some real-life testing on various > machines/platforms. As a preference/feature, yes please. The only issue I had was sometimes a slight 'drift' when in neutral position, it just needs a sensitivity setting, so it can be set to ignore tiny axis readings, or ignore values smaller than X. ----- Admin - PM me if you need anything, or if I've done something stupid... Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above. The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out! -- View this message in context: http://forum.openscad.org/3D-mouse-support-for-openscad-tp3998p18368.html Sent from the OpenSCAD mailing list archive at Nabble.com.

discuss@lists.openscad.org

Re: [OpenSCAD] 3D mouse support for openscad?!

The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!

The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!