I don't suppose there is a library out there for trusses?
ie Building trusses in roofs, e.g.
http://forum.openscad.org/file/t359/truss.png
Not necessarily doing load calculations etc (but that would be real
nice...),
just drawing simple ones with webs.
Any other building/plans related libraries?
OpenSCAD Admin - email* me if you need anything, or if I've done something stupid...
- on the Forum, click on my MichaelAtOz label, there is a link to email me.
Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.
--
Sent from: http://forum.openscad.org/
Did you Google "3D print truss"?
In the 1.2 million results, a lot of models come up.
You might be able to narrow that down.
Unfortunately, if you add "house" to the search, you get into some
interesting sites about printing full scale houses.
Add "model" and among the 3.1 million results you get a link to an 55
page article about analysis for testing strength of trusses.
Analysis of 3d Printed Beams and Truss Bridges
https://web.wpi.edu/Pubs/E-project/Available/E-project-032216-162253/unrestricted/awcornelius_MQP_Final.pdf
Where have you looked already?
On 2021-03-20 3:04 a.m., MichaelAtOz wrote:
ie Building trusses in roofs, e.g.
Not necessarily doing load calculations etc (but that would be real
nice...),
just drawing simple ones with webs.
Any other building/plans related libraries?
OpenSCAD Admin - email me if you need anything, * or if I've done
something stupid...
- on the Forum, click on my MichaelAtOz label, there is a link to
email me.
Unless specifically shown otherwise above, my contribution is in the
Public Domain;
to the extent possible under law, I have waived all copyright and
related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in
the above.
Sent from the OpenSCAD mailing list archive
http://forum.openscad.org/ at Nabble.com.
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
--
Ron Wheeler
Artifact Software
438-345-3369
rwheeler@artifact-software.com
OpenSCAD mailing list-2 wrote
Did you Google "3D print truss"?
No results found for "3D print truss" "openscad".
http://forum.openscad.org/file/t359/Capture-google-roof-truss-openscad-results.jpg
http://forum.openscad.org/file/t359/Capture-google-roof-truss-openscad.jpg
OpenSCAD mailing list-2 wrote
In the 1.2 million results, a lot of models come up.
You might be able to narrow that down.
I didn't say 'I don't suppose there is a 3D-model of a truss'.
I said 'a LIBRARY'.
<some expletive> have we inherited the reactionary negative of recent
politics?
I thought we were a contributory community where we helped people.
OpenSCAD Admin - email* me if you need anything, or if I've done something stupid...
- on the Forum, click on my MichaelAtOz label, there is a link to email me.
Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.
--
Sent from: http://forum.openscad.org/
https://www.thingiverse.com/thing:2427859
https://github.com/mattjoyce/Truss3D
Alex Gibson
admg consulting
edumaker limited
. Project management
. Operations & Process improvement
. 3D Printing
From: MichaelAtOz [mailto:oz.at.michael@gmail.com]
Sent: 20 March 2021 12:20
To: discuss@lists.openscad.org
Subject: [OpenSCAD] Re: I don't suppose there is a library out there for
trusses?
OpenSCAD mailing list-2 wrote
Did you Google "3D print truss"?
No results found for "3D print truss" "openscad".
<http://forum.openscad.org/file/t359/Capture-google-roof-truss-openscad-resu
lts.jpg>
http://forum.openscad.org/file/t359/Capture-google-roof-truss-openscad.jpg
OpenSCAD mailing list-2 wrote
In the 1.2 million results, a lot of models come up.
You might be able to narrow that down.
I didn't say 'I don't suppose there is a 3D-model of a truss'.
I said 'a LIBRARY'.
<some expletive> have we inherited the reactionary negative of recent
politics?
I thought we were a contributory community where we helped people.
OpenSCAD Admin - email* me if you need anything, or if I've done something
stupid...
- on the Forum, click on my MichaelAtOz label, there is a link to email me.
Unless specifically shown otherwise above, my contribution is in the Public
Domain;
to the extent possible under law, I have waived all copyright and related or
neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the
above.
Sent from the OpenSCAD mailing list archive http://forum.openscad.org/ at
Nabble.com.
https://www.avg.com/internet-security AVG logo
This email has been checked for viruses by AVG antivirus software.
www.avg.com https://www.avg.com/internet-security