[OpenSCAD] DXF for cut and engrave

A. Craig West acraigwest at gmail.com
Sat Oct 26 15:17:02 EDT 2019

Those would be 2d objects. 1d objects would be points on a line, which is
less useful

On Sat, 26 Oct 2019, 15:01 Parkinbot, <rudolf at digitaldocument.de> wrote:

> @nophead
> Yeah, I used an older snapshot ...
> @tp
> It can't be done within the 2D subsystem, as zero area objects are
> extinguished. Therefore it needs adding a 1D subsystem with new primitives
> like line() and polyline() and only the union() operator allowed collecting
> them into a list. 1D objects should be allowed to coexist with 2D objects
> within the xy-plane. Export into SVG or DXF is straight forward.
> --
> Sent from: http://forum.openscad.org/
> _______________________________________________
> OpenSCAD mailing list
> Discuss at lists.openscad.org
> http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openscad.org/pipermail/discuss_lists.openscad.org/attachments/20191026/d4cfe128/attachment.html>

More information about the Discuss mailing list