[OpenSCAD] battery spring spiral

r.d. terramir terramircomputers at gmail.com
Fri Sep 7 19:37:38 EDT 2018


Hmm you got a code example??
terramir

On Sep 7, 2018 4:12 PM, "nop head" <nop.head at gmail.com> wrote:

> Good luck. I model battery springs with a cone.
>
> On Fri, 7 Sep 2018, 23:03 r.d. terramir, <terramircomputers at gmail.com>
> wrote:
>
>> Ok I need to embed a spiral cutout. 17.25mm the biggest diameter  the
>> next about 14mm then 11.33 then 9.15. distance 6mm for the first 3
>> spirals then about 4mm although that end won't be in the plastic it's
>> the wide end. the wire diameter is 1.4mm. I need to know how I would
>> program this.
>>
>> terramir
>>
>> _______________________________________________
>> OpenSCAD mailing list
>> Discuss at lists.openscad.org
>> http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
>>
>
> _______________________________________________
> OpenSCAD mailing list
> Discuss at lists.openscad.org
> http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openscad.org/pipermail/discuss_lists.openscad.org/attachments/20180907/46b1d416/attachment.html>


More information about the Discuss mailing list