[OpenSCAD] battery spring spiral

nop head nop.head at gmail.com
Fri Sep 7 19:11:28 EDT 2018

Good luck. I model battery springs with a cone.

On Fri, 7 Sep 2018, 23:03 r.d. terramir, <terramircomputers at gmail.com>

> Ok I need to embed a spiral cutout. 17.25mm the biggest diameter  the
> next about 14mm then 11.33 then 9.15. distance 6mm for the first 3
> spirals then about 4mm although that end won't be in the plastic it's
> the wide end. the wire diameter is 1.4mm. I need to know how I would
> program this.
> terramir
> _______________________________________________
> OpenSCAD mailing list
> Discuss at lists.openscad.org
> http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openscad.org/pipermail/discuss_lists.openscad.org/attachments/20180908/cf794cc5/attachment.html>

More information about the Discuss mailing list